Tab-Tite™ Holder for 7" tablets including iPad mini & Samsung Galaxy

Get the most out of your tablet with the RAM Tab-Tite™. The spring loaded design makes it easy to insert and remove your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device.

The RAM Tab-Tite™ is compatible with the following tablets:
Apple iPad mini 1 to 6 (without case)
Amazon Kindle Fire* (without case or with thin case / skin)
Blackberry Playbook (without case or with thin case / skin)
Dell Streak 7 (without case or with thin case / skin)
Motorola XYBOARD 8.2 (without case or with thin case / skin)
Samsung Galaxy Tab 7.0 (without case or with thin case / skin)
Samsung Galaxy Tab 7.0 Plus (without case or with thin case / skin)
Samsung Galaxy Tab 7.7 (without case or with thin case / skin)

The Tab-Tite™ holder is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.

Holder Dimensions:
Height: 6.8" minimum to 9" maximum
Width: Maximum width to 5.31"
Depth: 0.125" minimum to 0.56" maximum

For devices with thick / bulky cases such as the Otterbox, please see X Grip II or RAM-HOL-TAB-SM

Features:
1. Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded holder allows for quick release of your tablet
5. Full access to all ports

Material:
High Strength Composite

Ball Size:
1" Rubber Ball "B" Size

*Does not suit Kindle Fire HD, please use X Grip II

Search Filter
Device	Tablet
Hole Pattern	AMPS 4-Hole
Product Line	Tab-Tite
Solution Type	Holders

Nick Major	28/04/2014
I can fully agree with the other review. I bought this mount for my Galaxy Tab 3 for use in my Microlight. The Tablet moves around this mount and ends up at an angle. When it does sit in place (Which is rare) You cannot access any of the buttons to operate the device. This holder may fit the Ipad Mini, but it is certainly not fit for purpose when used with the Samsung Galaxy Tab 3. On the plus side, other RAM products I have bought are faultless and the delivery super quick so Shall remain a loyal RAM UK customer in the future.

George Williams	14/05/2012
The product was purchased for a Samsung Galaxy Tab 2 7.0 and it was not a perfect fit. It does hold the tablet with no case but the slot in the top and bottom cups is only just smaller than the tablet. The tablet can move around and ends up at a jaunty 45 degree angle no matter what you do. It may be better when I put a silicon case on the tab but for now I am having to use Blu Tak to make it work. If you have a Galaxy Tab 2 7.0 I would approach this mount with caution. Perhaps wait for a bespoke mount.